What Is The Hole In The Middle Of A Record Called?

What is the middle of a record called?

Labels: The paper circle in the middle of a pressed record.

Sometimes referred to as a “sticker”, a record label is actually not adhered to the face of the disc after pressing – it is an integral part of the pressing process, and serves to cool the middle of the record while it is being pressed..

Why did 45 rpm records have a big hole?

When a new 45 dropped from the spindle onto the turntable, it was required to spin up from a dead stop to 45 RPM very quickly. This torque tended to cause the small holes to go out-of-round very quickly, causing record to wobble as it spun.

Is Heating vinyl records dangerous?

Heating vinyl records, as with making record bowls and cuffs, releases phthalates and dioxin, which are known carcinogens. Heating polyvinyl chloride releases gas which can leave a permanent residue on the interior of ovens this is done in. This should not be done in any oven used for food preparation.

What does OG mean in vinyl records?

original = firstOG = original = first.

Why does vinyl sound so good?

Vinyl Sounds Better Vinyl sounds better than MP3s ever could. Most of the music is broadcast in some lossy format, where details are missed, and the overall quality is reduced. It happens because audio files get compressed to make them small enough to store thousands of them on the phone, and to stream online.

What can you do with old vinyl records?

Where to sell vinyl recordseBay. You can sell your records directly to collectors via eBay. … Discogs.com. Discogs is one of the most popular sites for buying and selling records online. … Music Stack. … Vinyl of the Day. … Etsy.

How do you tell if a vinyl record is a first pressing?

Look on the spine of the LP record sleeve. First pressings will usually have a four letter/four number combination, such as ABCD-1234. And anything after a second or third pressing will have a two letter/five number combination, such as AB-12345. Go to Discogs.com or Recordgeek.com to verify your first pressing.

How big is the hole in the middle of a record?

The standard hole for a 12″, 10″ or small hole 7″ is 1/4 inch. Large center holes are 1.5 inches.

What do you call the thing you put in the middle of a 45 record?

A 45 rpm adapter (also 45 rpm record insert, 45 rpm spindle adapter, or 7 inch adapter, the common size of 45 RPM records) is a small plastic or metal insert that goes in the middle of a 45-rpm record so it can be played on the standard size spindle of a turntable.

When did vinyls stop being made?

1989Vinyl records were overtaken in sales by CDs in 1988, and were no longer in mass production after 1989.

Are vinyl records making a comeback?

However, in 2007, vinyl sales made a sudden small increase, starting its comeback, and by the early 2010s it was growing at a very fast rate. In some territories, vinyl is now more popular than it has been since the late 1980s, though vinyl records still make up only a marginal percentage (<6%) of overall music sales.

What were 45s made of?

78, 33, 45 RPM History The record material was made out of Shellac, a material that can “ping” when you hit it, causing additional noise.

When did they stop making 45 rpm records?

1990In 1987, A&M released the first cassette single and other record companies quickly followed suit. By 1990 however, record companies began discontinuing the 45, except for jukebox releases and collector’s items. However with the vinyl resurrection of the last few years, many companies are back to pressing vinyl.

What is first pressing vinyl?

The Original Pressing An original pressing typically refers to a vinyl record that was made from the initial batch of lacquers in the production process and cut from the original master recordings. As they are the first records to be pressed, many consider these to be the definitive edition and best sounding records.

What is a second pressing?

Any repressing (2nd press etc) are a seperate, later run of copies of that record usually using the same master copy.

Are Records vinyl?

Starting in the 1940s polyvinyl chloride became common, hence the name vinyl. In the mid-2000s, gradually, records made of any material began to be called vinyl records, or simply vinyl.

Why is a 45 record called a 45?

The most common form of the vinyl single is the “45” or “7-inch”. The names are derived from its play speed, 45 rpm, and the standard diameter, 7 inches. The 7-inch 45 rpm record was released 31 March 1949 by RCA Victor as a smaller, more durable and higher-fidelity replacement for the 78 rpm shellac discs.

Can 45s be played on record players?

Every turntable can play 33 and 45 RPM records. Only those classified as “three speed” support 78 RPM. These old records have wider grooves, so you may need to replace your stylus to play them. … Because record players are analog systems, you’re not guaranteed the same precision that you’d expect from a digital device.