- Is Grade 8 or Grade 5 stronger?
- What grade is b7 equivalent to?
- What is a Class 8.8 bolt?
- What is the difference between 8.8 and 12.9 grade bolts?
- Is 8.8 high tensile?
- Is a 12.9 Bolt stronger than Grade 8?
- What is a 12.9 grade bolts?
- Are higher grade bolts more brittle?
- What type of steel is Grade 8?
- Is Grade 8 or 10.9 stronger?
- What is the strongest bolt grade?
- Are Grade 8 bolts brittle?
Is Grade 8 or Grade 5 stronger?
Grade 8 bolts have been hardened more than grade 5 bolts.
Thus they are stronger and are used in demanding applications such as automotive suspensions.
Grade 8 bolts have 6 evenly spaced radial lines on the head.
Grade G is roughly equivalent to Grade 8..
What grade is b7 equivalent to?
B7. This chromium molybdenum steel has similar strength to SAE grade 5 fasteners, however, it is specifically used in high temperature and pressure applications. This grade is for fittings, flanges, valves, and pressure vessels. It is also used as threaded rod in concrete and epoxy.
What is a Class 8.8 bolt?
Metric Bolt Grades. Class 8.8. Head Marking: 8.8. Material: Medium carbon steel, quenched and tempered.
What is the difference between 8.8 and 12.9 grade bolts?
The mechanical difference between the 12.9 and 8.8 is yield strength (roughly 90% of 1200 MPa vs 80% of 800 MPa). That means the 12.9 can be stretched further (i.e. torqued to some higher value) before it yields, which of course increases the clamp force.
Is 8.8 high tensile?
Most often, customers looking for a high tensile bolt may just be looking for the 8.8 grade. … This grading, which is typically stamped on the head of the bolt, has the same tensile strength as a grade 8.8 bolt. Bolts labelled with the grade 8.8 or S are solid, heavy duty bolts that can be used for a variety of tasks.
Is a 12.9 Bolt stronger than Grade 8?
Many fasteners (screws, etc.), especially smaller sizes, are typically not graded—their strength isn’t specified….Table 1.Grade/ClassStrengthMetric Class 8.8Similar to Grade 5.Metric Class 10.9Similar to Grade 8.Metric Class 12.9The highest metric class for strength, it exceeds Grade 8.11 more rows
What is a 12.9 grade bolts?
The minimum ultimate tensile strength of the Grade 12.9 Metric Hex Head Bolts is about 1242 Mpa or 180,000 PSI, making them the highest grade of bolts produced.In fact, the Grade 12.9 Nuts is known for their high tensile strength.
Are higher grade bolts more brittle?
One common misconception about bolts is that a higher rated bolt is stronger, yet more brittle, and therefore lower grades should be used in places like in suspension systems so they can deform rather then break. This is wrong! There are two types of forces a bolt experiences, tension and shear.
What type of steel is Grade 8?
carbon alloy steelGrade 8 bolts are medium carbon alloy steel, quenched and tempered at a minimum temperature of 800 degrees Fahrenheit. They are then heat-treated to achieve a hardness of 33 to 39 on the Rockwell C scale.
Is Grade 8 or 10.9 stronger?
Class 10.9 is stronger than class 8.8. It is commonly found in high strength automotive applications. Class 10.9 is similar to grade 8. A low carbon steel for general use.
What is the strongest bolt grade?
grade 8The strongest commercial-quality bolt is grade 8, marked by six raised dashes; its medium-carbon alloy steel has been quenched and tempered to achieve a tensile strength of 150,000 psi.
Are Grade 8 bolts brittle?
In actual fact, Grade 5 bolts are often preferred over Grade 8 . A Grade 8 has a very high tensile strength, but can be brittle. In applications such as suspensions, a very high number of load/unload cycles can produce work hardening, which produces an immediate, or catastrophic failure.